Order Products : sales@su-jiao.com
Advanced Composites ADX-5001
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | reMGo0_Advanced-Composites-ADX-5001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Advanced Composites ADX-5001 is a polypropylene product, which contains 20% talc filler. It is available in North America. Typical application areas are: automotive industry. The main characteristics are: high liquidity. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 29 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 22.5 | MPa | ASTM D638 |
| Flexural Modulus | 1680 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 45 | J/m | ASTM D256 |
| 23°C | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 129 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 65.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | > 2.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 218 | °C | |
| Front Temperature | 218 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 10% over max fill pressureHolding Pressure: 50 to 60% of max fill pressureInjection Speed: 1 to 3 inches/secScrew RPM: 1 to 2 secs before mold open |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 81 C 40 | Plastcom | PP, Unspecified | SLOVALEN® |
| APEX® 94-A0098A-84 | Teknor Apex Company | PVC, Flexible | APEX® |
| Fainplast PVC PG 6620 | Fainplast Compounds S.r.l | PVC+NBR | Fainplast PVC |
| EcoLon® GF1974-BK1 | Wellman Engineering Resins | Nylon 6 | EcoLon® |
| Durethan® DP BM 65 X FM30 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
