Order Products : sales@su-jiao.com
Braskem PE GM9450F
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rdaKKy_Braskem-PE-GM9450F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE GM 9450 F is a high-density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. Application: Retail bags; perforated rolls; repackaging; geomembranes; bags in general. Process: Blown Film Extrusion |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 9.3 | g/10 min | |
| 190°C/5.0 kg | 0.33 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 40.0 | MPa | |
| TD : Yield | 30.0 | MPa | |
| MD : Break | 40.0 | MPa | |
| TD : Break | 50.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 620 | % | |
| TD : Break | 680 | % | |
| Dart Drop Impact | 210 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 6.0 | g | |
| TD | 60 | g | |
| Seal Initiation Temperature | 125 | °C | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Puncture Resistance | 80.0 | J/m | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam BFR460B1 | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| VECTRA® E531i | Celanese Corporation | LCP | VECTRA® |
| U-polymer P-3001S | UNITIKA Plastics Division | Polyarylate | U-polymer |
| ASTALAC™ ABS KMZ | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| LUBEMID A26 EL20 NATURAL | LUBEN PLAST srl | Nylon 66 | LUBEMID |
