Order Products : sales@su-jiao.com
Complet® LGF60-PP
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PlastiComp, Inc. |
| Trademark: | Complet® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rcEoMq_Complet-LGF60-PP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Complet®LGF60-PP is a polypropylene homopolymer (PP Homopoly) product, which contains 60% long glass fibers. It is available in North America, Europe or Asia Pacific. The main characteristics are: homopolymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 11000 | MPa | ASTM D638 |
| Tensile Strength | 117 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.0 - 2.0 | % | ASTM D638 |
| Flexural Modulus | 10300 | MPa | ASTM D790 |
| Flexural Strength | 186 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 340 | J/m | ASTM D256 |
| Unnotched Izod Impact | 690 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 153 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Regrind | 5 | % | |
| Rear Temperature | 199 - 210 | °C | |
| Middle Temperature | 204 - 216 | °C | |
| Front Temperature | 210 - 221 | °C | |
| Nozzle Temperature | 204 - 216 | °C | |
| Processing (Melt) Temp | 210 - 221 | °C | |
| Mold Temperature | 65.6 | °C | |
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 30 - 50 | rpm | |
| Cushion | 6.35 | mm | |
| Screw L/D Ratio | 18.0:1.0 to 20.0:1.0 | ||
| Screw Compression Ratio | 2.0 : 1.0 - 3.0 : 1.0 |
| Injection instructions |
|---|
| Injection speed: 2 in/secInjection pressure: medium to maximum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Synthos PS GP 585C | Synthos S.A. | PS (GPPS) | Synthos PS |
| Cheng Yu N6G35 | Cheng Yu Plastic Company Limited | Nylon 6 | Cheng Yu |
| EPO-TEK® 320-LV | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Pujie ACM-02 | Zhanhua Pujie Chemical Technology Co.,Ltd | CPE | Pujie |
| LinGen FR190 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PPE | LinGen |
