Order Products : sales@su-jiao.com
Braskem PP C123-01N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem Europe GmbH |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rZdGKh_Braskem-PP-C123-01N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Braskem C123-01N Polypropylene Resin is a high performance impact copolymer developed for extrusion and blow moulding applications. Braskem C123-01N Polypropylene Resin is a high stiffness, high impact copolymer offering an excellent combination of high stiffness and toughness with good processability. Braskem C123-01N Polypropylene Resin is nucleated and features very high crystallization temperature. Applications for Braskem C123-01N Polypropylene Resin:
Regulatory Information Braskem C123-01N Polypropylene Resin should comply with EU, No 10/2011. It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.3 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 7.0 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1450 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C, Injection Molded | 8.0 | kJ/m² | |
| 0°C, Injection Molded | 12 | kJ/m² | |
| 23°C, Injection Molded | 55 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 95.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature 2 | 151 | °C | ISO 306/A |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoPrene 55A-4000 | KMI Group Inc. | TPV Alloy | PrimoPrene |
| Tenogel® ABS A3 HF NTLA010 AB308 | Petropol Industry and Trade of Polymers LTDA | ABS | Tenogel® ABS |
| NatureFlex™ 19NE30 | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| CP PRYME® Polypropylene PPC100-8M | Chase Plastics Services Inc. | PP Copolymer | CP PRYME® Polypropylene |
| GELOY™ CR3020 resin | SABIC Innovative Plastics | ASA+SAN | GELOY™ |
