Order Products : sales@su-jiao.com
Kynar® MG15
| Category: | PVDF , Polyvinylidene Fluoride |
| Manufacturer: | Arkema |
| Trademark: | Kynar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rY307S_Kynar-MG15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KYNAR® MG15 is a crystalline high viscosity polymer of polyvinylidene difluoride. It is an engineering polymer with an outstanding balance of physical strength and high chemical resistance which make it ideal for micro and ultra-filtration membranes for durable water purification and other applications. KYNAR® MG15 is soluble in selected solvents and can be used in solution processing applications. It is especially recommended for hollow fiber and flat sheet membranes. KYNAR® MG15 has NSF, FDA, and USP Class VI certifications for use in potable water, food processing, and bio-pharma applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.77 to 1.79 | g/cm³ | ASTM D792 |
| Solution Viscosity 1 | 1500 to 2000 | mPa·s | Brookfield |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1380 to 2310 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 44.8 to 55.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 20 to 100 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1380 to 2310 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 162 to 172 | °C | ASTM D3418 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Refractive Index 2 | 1.420 | ASTM D542 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (230°C, 100 sec^-1) | 3500 to 3900 | Pa·s | ASTM D3835 |
| Note Message | |
|---|---|
| 1 . | 10% NMP solution, Spindle @ 20 rpm, 20°C, #3 |
| 2 . | at Sodium D Line |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premier LB02019 - D | Premier Polymers, LLC. | LLDPE | Premier |
| Torlon® 7130 | Solvay Specialty Polymers | PAI | Torlon® |
| Akulon® K224-G6-FC 99.99.99 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Evoprene™ COGEE 682 | AlphaGary | SEBS | Evoprene™ COGEE |
| Plenco 05118 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
