Category: | Silicone Rubber, RTV-2 , Silicone Rubber, RTV-2 |
Manufacturer: | Techsil Limited |
Trademark: | Techsil® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | rXXOoQ_TechsilRTV27909.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Techsil RTV27909 is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1: 1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. Properties:
Applications: Techsil RTV27909 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required. |
General Information | |
---|---|
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | |
---|---|---|---|
Density | 0.980 | g/cm³ |
Thermal | Nominal Value | Unit | |
---|---|---|---|
CLTE - Flow | 3.0E-4 | cm/cm/°C | |
Thermal Conductivity | 0.17 | W/m/K | |
Service Temperature | -50 - 150 | °C |
Electrical | Nominal Value | Unit | |
---|---|---|---|
Comparative Tracking Index | > 600 | V |
Optical | Nominal Value | ||
---|---|---|---|
Refractive Index | 1.410 |
Uncured Properties | Nominal Value | Unit | |
---|---|---|---|
Color | |||
-- 1 | Clear/Transparent | ||
-- 2 | Clear/Transparent | ||
Mix Ratio by Weight (PBW) | |||
Part A | 1.0 | ||
Part B | 1.0 | ||
Density | |||
-- 3 | 0.980 | g/cm³ | |
-- 4 | 0.980 | g/cm³ | |
Viscosity | |||
-- 5 | 1.0 | Pa·s | |
-- 6 | 1.0 | Pa·s | |
-- 7 | 1.0 | Pa·s | |
Pot Life (23°C) | 30 | min |
Cured Properties | Nominal Value | Unit | |
---|---|---|---|
Electric strength | 20 | kV/mm | |
Relative Permittivity (60 Hz) | 2.80 | ||
Volume Resistivity | 2.0E+15 | ohms·cm | |
Dissipation Factor (60 Hz) | 1.0E-3 |
Note Message | |
---|---|
1 . | Part A |
2 . | Part B |
3 . | Part A |
4 . | Part B |
5 . | Part A |
6 . | Part B |
7 . | Mixed |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Stanyl® TW363 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
Toyolac® 450Y MH1 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
APEX® 3610-70 | Teknor Apex Company | PVC, Flexible | APEX® |
ANYPOL SE-3000 | SH Energy & Chemical | PS (EPS) | ANYPOL |
Latamid 12 H 90FE03 | LATI S.p.A. | Nylon 12 | Latamid |