Order Products : sales@su-jiao.com
Elastamax™ XL-2065 BLACK 2001
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rWaInh_Elastamax-XL-2065-BLACK-2001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance of physical properties and processability, and are an economical alternative to traditional thermoset rubber and more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 60 | ||
| Shore A, 10 sec | 65 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 6.89 | MPa | ASTM D412A |
| Tensile Elongation 2(Break) | 830 | % | ASTM D412A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 1.08 | MPa | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melthene® -H 900B (Black) | TOSOH Corporation | EVA | Melthene® -H |
| Sumiflex® QE QE131ATH | Mitsubishi Chemical Corporation | TES | Sumiflex® QE |
| Vyncolit® 52-70-70 V0 | Vyncolit N.V. | DAP | Vyncolit® |
| Witcom PEEK 2007/020 | Witcom Engineering Plastics B.V. | PEEK | Witcom PEEK |
| ExxonMobil™ HDPE HPA 020 Molding | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
