Order Products : sales@su-jiao.com
Hapflex™ 580 FR
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | Hapflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rSq2TC_Hapflex-580-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The HAPFLEX FR Series products are flame retardant and are available in a 65A, 80A and 50D hardness.They can be used in both Liquid Molding applications (i.e. parts, gaskets, coatings) and electrical insulation applications (i.e. potting and encapsulating). All of these products have a rating of 94 V-0. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D2566 |
| Weight - per cubic inch | 18 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 40.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 17.2 | MPa | ASTM D638 |
| Tensile Strength | 6.21 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 380 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 2 | 65.8 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 | |
| Unnotched Izod Impact | No Break | ASTM D256 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Thermoset Mix Viscosity (25°C) | 1120 | cP | ASTM D4878 |
| Demold Time (21°C) | 240 to 360 | min | Internal Method |
| Note Message | |
|---|---|
| 1 . | 100 g |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRANSMARE® 14CGF20-0.001 | Transmare Compounding B.V. | PP Copolymer | TRANSMARE® |
| FERREX® GPP30CS49UL-GY | Ferro Corporation | PP, Unspecified | FERREX® |
| EPIMIX PBT/PET GFR 30 NC | EPSAN Plastik SAN. ve TiC. A.S. | PBT+PET | EPIMIX |
| INSTRUC PPGF15FC | Infinity LTL Engineered Compounds | PP, Unspecified | INSTRUC |
| Petro Rabigh PP Y101 | Rabigh Refining & Petrochemical Co. | PP Homopolymer | Petro Rabigh PP |
