Order Products : sales@su-jiao.com
Mecoline IS RDX 5241 F
| Category: | PVDF , Polyvinylidene Fluoride |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rQ0OzX_Mecoline-IS-RDX-5241-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This compound is an excellent choice for manufacturing insulated hook-up wires in military and aerospace industries (airframe wire) and component conductors for MIL-C-27500 cables |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.75 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 73 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 811-1-1 | ||
| -- 1 | > 30.0 | MPa | |
| -- 2 | > 35.0 | MPa | |
| Tensile Elongation | |||
| Break 3 | > 130 | % | ASTM D638 |
| Break 4 | > 150 | % | IEC 811-1-1 |
| Break 5 | > 300 | % | IEC 811-1-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+11 | ohms·cm | ASTM D257 |
| Electric Strength | > 15 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 42 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 195 to 205 | °C | |
| Cylinder Zone 2 Temp. | 195 to 205 | °C | |
| Cylinder Zone 3 Temp. | 200 to 210 | °C | |
| Cylinder Zone 4 Temp. | 210 to 220 | °C | |
| Cylinder Zone 5 Temp. | 210 to 220 | °C | |
| Adapter Temperature | 215 to 225 | °C | |
| Head Temperature | 220 to 230 | °C | |
| Extruder Screw L/D Ratio | 25.0:1.0 to 30.0:1.0 | ||
| Die Temperature | 220 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | After crosslinking |
| 2 . | Before crosslinking |
| 3 . | After ageing in air oven 168h at 200°C |
| 4 . | After crosslinking |
| 5 . | Before crosslinking |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF8BTL (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Capran® 2500M | Honeywell | Nylon 6 | Capran® |
| Forflex® 71600ID42 | SO.F.TER. SPA | TPO (POE) | Forflex® |
| KEBAFORM® C 906 UR | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| Sylvin 8200-85 Brown 7424 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
