Order Products : sales@su-jiao.com
Petrothene® GA584189
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rPLYP8_Petrothene-GA584189.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene GA584189 exhibits exceptional flow for high speed molding of lids, while providing good ESCR and tear resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.929 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 110 | g/10 min | ASTM D1238 |
| Spiral Flow | 61.7 | cm | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 15.2 | MPa | |
| Break | 11.7 | MPa | |
| Tensile Elongation 2(Yield) | 11 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% Secant | 552 | MPa | |
| 2% Secant | 476 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 51.1 | °C | ASTM D648 |
| Brittleness Temperature | -58.3 | °C | ASTM D746 |
| Vicat Softening Temperature | 83.3 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 191 | °C | |
| Front Temperature | 204 | °C | |
| Nozzle Temperature | 204 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prixene® PH060I04 | POLYMAT | PP Homopolymer | Prixene® |
| Next Nylon 66 Prime Series PG30-01GY | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| APEX® 130-P | Teknor Apex Company | PVC, Flexible | APEX® |
| ASTALAC™ ABS X15P | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Loyblend® YA-1201 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | ABS+PBT | Loyblend® |
