Order Products : sales@su-jiao.com
Fluoraz FEPM 799
| Category: | FEP , Perfluoroethylene Propylene Copolymer |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Fluoraz |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rOpAgI_Fluoraz-FEPM-799.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoraz FEPM 799 is a Perfluoroethylene Propylene Copolymer (FEP) product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D297 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 18.1 | MPa | ASTM D412 |
| Tensile Strength (Break) | 20.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 120 | % | ASTM D412 |
| Compression Set 1 | ASTM D395 | ||
| 23°C, 70 hr | 18 | % | |
| 175°C, 166 hr | 36 | % | |
| 200°C, 22 hr | 35 | % | |
| 200°C, 70 hr | 40 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (276°C, 70 hr) | -48 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (276°C, 70 hr) | -9.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air (276°C, 70 hr) | 2.0 | ASTM D573 | |
| Change in Tensile Strength | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | -8.0 | % | |
| 135°C, 70 hr, in MIL-H-5606 | -25 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | -24 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | 21 | % | |
| 135°C, 70 hr, in MIL-H-5606 | 22 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | 28 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | -6.0 | ||
| 135°C, 70 hr, in MIL-H-5606 | -17 | ||
| 175°C, 70 hr, in Stauffer 7700 Fluid | -16 | ||
| Change in Volume | ASTM D471 | ||
| 135°C, 70 hr, in Ford ATF | 7.0 | % | |
| 135°C, 70 hr, in MIL-H-5606 | 19 | % | |
| 175°C, 70 hr, in Stauffer 7700 Fluid | 18 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -7 to 232 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rubber Classification | FEPM | ASTM D1418 | |
| TR 10/50 | 7 | °C | ASTM D1329 |
| Note Message | |
|---|---|
| 1 . | In air, 25% of original deflection |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ABS 840 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| AIE PET 40G8 | Asia International Enterprise (Hong Kong) Limited | PET | AIE PET |
| Baytec® MS-242 (HQEE) | Covestro - PUR | PUR-Ester/MDI | Baytec® |
| En Chuan 6120TWA | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| HAIPLEN H30 G5 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
