Order Products : sales@su-jiao.com
ESTOPLAST XU 6435BB11
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST XU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rOYI8k_ESTOPLASTXU6435BB11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 66 - Mineral and Glass Fiber Reinforcement, 35% Automotive: Power train, Exterior trim, interior trim, Electrical components and connectors Electrical & Electronic: Low voltage switch gear/power distribution, Lighting, Power connectors , MCB, |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.71 | g/cm³ | ASTM D792 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 5.0 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.7 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 125 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.1 | % | ASTM D638 |
| Flexural Strength | 190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 60 | J/m | ASTM D256A |
| Unnotched Izod Impact | 440 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 175 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 160 | °C | ASTM D648 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.5 mm) | V-0 | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.2 mm | 960 | °C | IEC 60695-2-12 |
| 3.0 mm | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85 - 90 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 275 - 285 | °C | |
| Middle Temperature | 285 - 295 | °C | |
| Nozzle Temperature | 270 - 280 | °C | |
| Processing (Melt) Temp | 275 - 285 | °C | |
| Mold Temperature | 55 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 A1VS02 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| TECHLEN M7151 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Daelim Po1y® PH-870 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
| EnCom F0 ABS 6040 | EnCom, Inc. | ABS | EnCom |
| Hostacom CR 250 F C11301 | LyondellBasell Industries | PP, Unspecified | Hostacom |
