Order Products : sales@su-jiao.com
ESTALUX 9202 A
| Category: | MABS , Methyl Methacrylate / ABS |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTALUX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rMuEB8_ESTALUX-9202-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The typical impact properties of the ABS and the excellent transparency of the PMMA find a perfect balance in the two new grades Estalux : 9202 A - 9206 A It consists in MABS for injection moulding that are different for Melt flow , both are clear and it's possible to have them colored on the specification required by the customer. With the compounds Estalux serie A it's possible to produce toys, household appliances, office devices, sport and leisure products, cosmetic packaging. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 220°C/10.0 kg | 2.0 | g/10 min | ASTM D1238 |
| 220°C/21.6 kg | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.70 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2050 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 45.0 | MPa | ASTM D638 |
| Fracture | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 1900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 108 | °C | ASTM D1525 1 |
| -- | 95.0 | °C | ASTM D1525 2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | UL 94 | |
| 3.20 mm | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 240 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Pressure - Medium |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h), 压 力1 (10N) |
| 2 . | 标准 B (120°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AFFINITY™ PL 1840G | The Dow Chemical Company | POP | AFFINITY™ |
| Di-Pak™ R-4307 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Durethan® BM 240 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| HAIPLEN EP60 T5 | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| PENTAMID B L10 H RC schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
