Monprene® SP-29969 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene SP-29969 is a high performance thermoplastic elastomer that is designed for a variety of consumer applications including sporting goods, and is available in colors. Monprene SP-29969 is a translucent, medium hardness, low density, UV resistant grade that is designed for extrusion and also suitable for injection molding.

General Information
Features	Low density Good UV resistance Workability, good Good coloring Good wear resistance Good adhesion Good chemical resistance Good toughness Medium hardness
Uses	Handle Washer Sporting goods Consumer goods application field
RoHS Compliance	RoHS compliance
Appearance	White Translucent Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	24	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	70	ASTM D2240
Shaw A, 5 seconds	68	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Flow			ASTM D412
100% strain	4.14	MPa	ASTM D412
200% strain	4.48	MPa	ASTM D412
300% strain	4.83	MPa	ASTM D412
Tensile Strength - Flow (Break)	10.6	MPa	ASTM D412
Tensile Elongation - Flow (Break)	780	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	35 - 49	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 4 Temp.	199 - 249	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rMQVIw_MonpreneSP29969.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 280.5 TFE 13 SI 2	RTP Company	Nylon 66	RTP
RTP 303 FR UV	RTP Company	PC	RTP
SABIC® PP 412MN40	Saudi Basic Industries Corporation (SABIC)	PP Impact Copolymer	SABIC® PP
Karina CLEAR PVC COMPOUND 80/210-IS-RG	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Lupoy® GN5001RFP	LG Chem Ltd.	PC+ABS	Lupoy®