Order Products : sales@su-jiao.com
Smooth-On StyroCoat®
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Smooth-On |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rKOHZF_Smooth-On-StyroCoat-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| StyroCoat® Plastic is a flame rated (E-84) sprayable polyurethane plastic formulated to economically coat a variety of surfaces. Dispensed through Smooth-On's EZ~Spray®, Jr. cartridge system, the plastic cures in about 2 seconds and can be applied to vertical surfaces without running off. An advantage of the system is that large areas can be covered in a short period of time. Cured plastic is lightweight, flame, impact, and water resistant. It can be sanded for priming and painting. Plastic can also be sprayed into a rubber mold to make fast, impact resistant castings (application of a release agent may be necessary before spraying into the mold). StyroCoat® Plastic is used for theme design / fabrication applications, making movie set environments, making surfaces water resistant and other industrial applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D1475 |
| Specific Volume | 0.892 | cm³/g | ASTM D1475 |
| Viscosity | Variable | ASTM D2393 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Spread | 60.0 | ASTM E84 | |
| Smoke Density (6.35 mm) | 400 | ASTM E84 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mixing Ratio | 1A:1B by volume |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 1.5 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 903 | MPa | ASTM D638 |
| Tensile Strength (Break) | 21.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 20 | % | ASTM D638 |
| Flexural Modulus | 1410 | MPa | ASTM D790 |
| Flexural Strength | 44.1 | MPa | ASTM D790 |
| Compressive Modulus | 328 | MPa | ASTM D695 |
| Compressive Strength | 34.5 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 54.4 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 0.033 | min | ASTM D2471 |
| Demold Time (23°C) | 60 | min | ASTM D2471 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® CP 1011 | Plastic Solutions, Inc. | PP Impact Copolymer | PrimaFlex® |
| Ad-Tech Epoxy EC-413 Medium LP | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Argothane® 18411 | Argotec LLC | TPU, Unspecified | Argothane® |
| INEOS PP 100-HR25 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| PALRAN® R S H 08 GF 16 | pal plast GmbH | ABS | PALRAN® |
