Order Products : sales@su-jiao.com
TITANPRO® SM240
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANPRO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rIbfpM_TITANPRO-SM240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene impact copolymer. Titanpro SM240 is a high flow material. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1 APPLICATIONS: Automotive parts, appliances, housewares, large flat trays, thin complex parts. Characteristics: Easy processing, permitting wider latitude in design, good toughness at low temperature, good surface finish and color, low built-in-stress and excellent heat stability. FABRICATION: Equipment - ram or screw injection machines and techniques - standard processing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 1320 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 69 | J/m | ASTM D256A |
| Instrumented Dart Impact (-29°C) | 27.5 | J | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL8F 801 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| Spartech Polycom SC14-1080L | Spartech Polycom | Nylon 66 | Spartech |
| FERREX® GPP40CC85WH | Ferro Corporation | PP Homopolymer | FERREX® |
| Hifax TYC 1168X | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| OTECH PVC PL1001-19 - Plenum Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
