Order Products : sales@su-jiao.com
Andur 6 APLM
| Category: | PCL , Polycaprolactone |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rGhaaZ_Andur-6-APLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 6 APLM is a polycaprolactone based, toluene diisocyanate terminated prepolymer. This high-performance system yields an elastomer with a hardness of about 60 Shore A when this prepolymer is cured with Curene 442 [4,4'-ethylenebis (orthochloroaniline)]. This system avoids this use of mixed curatives or plasticizers which are usually required to achieve hardnesses in this range, thereby, resulting in ultra high-performance properties. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 2000 | cP | ASTM D2393 |
| 100°C | 650 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.2 to 3.5%Appearance, 70°F: SolidSpecific Gravity, ASTM D792, 70°F: 1.12 g/mlSpecific Gravity, ASTM D792, 212°F: 1.11 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 899 X 125746 A | RTP Company | Acetal (POM) Copolymer | RTP |
| TAROLOX 111 G7 DX02 | Taro Plast S.p.A. | PET | TAROLOX |
| Hylex® P1310G40FRMA | Ravago Manufacturing Americas, LLC | PC | Hylex® |
| Iupiace® GN20 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Rotuba CA H4 | Rotuba Extruders, Inc. | CA | Rotuba CA |
