Order Products : sales@su-jiao.com
POLYCOMPO PE 5000SR
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rF60i9_POLYCOMPO-PE-5000SR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 5000SR is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific. Typical application: Adhesives/Tapes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.37 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 150 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 17.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 1100 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 12 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 132 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex A00200FN | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| Radilon® A RV350K 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| Wondel® S SN0T | Nanjing Julong Engineering Plastics Co., LTD | ABS | Wondel® S |
| MAXAMID™ PA66-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Sylvin 7833-75 Grey 9471 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
