Order Products : sales@su-jiao.com
apinat® DP1888
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rDwVmU_apinat-DP1888.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP1888 is a biodegradable polymer (Biodeg Polymers) product,. It is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 - 1.26 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 57 | ASTM D2240 | |
| Shaw D | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.30 - 24.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 520 - 890 | % | ASTM D638 |
| Abrasion Resistance | 30.0 - 250 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 30.0 - 124 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 110 - 130 | °C | |
| Middle Temperature | 120 - 140 | °C | |
| Front Temperature | 120 - 140 | °C | |
| Nozzle Temperature | 120 - 145 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 - 130 | °C | |
| Cylinder Zone 2 Temp. | 120 - 140 | °C | |
| Cylinder Zone 3 Temp. | 125 - 155 | °C | |
| Cylinder Zone 4 Temp. | 130 - 160 | °C | |
| Cylinder Zone 5 Temp. | 135 - 155 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene GPP1620 | Teknor Apex Asia Pacific PTE. LTD. | PP Homopolymer | Sinpolene |
| NORYL™ PX5558 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| DENKA Transparent Polymer TX-100S | Denka Company Limited | MMS | DENKA Transparent Polymer |
| ESTAPROP 1020 | Cossa Polimeri S.r.l. | PP Homopolymer | ESTAPROP |
| RTP 799 X 143524 EG | RTP Company | HDPE | RTP |
