Order Products : sales@su-jiao.com
Lastilac ARUV-V0
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Lastilac |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rDEGQP_Lastilac-ARUV-V0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Acrylonitrile-Butadiene-Styrene copolymer (ABS). UV stabilised. UL94 V-0 classified, with halogens, PBB/PBDE free. Product UL certified. Very high dimensional stability. Very good surface appearance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.45 to 0.65 | % | |
| Flow : 2.00 mm | 0.40 to 0.60 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 2400 | MPa | |
| 60°C | 1950 | MPa | |
| 90°C | 1600 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 23°C | 40.0 | MPa | |
| Yield, 60°C | 30.0 | MPa | |
| Yield, 90°C | 20.0 | MPa | |
| Break, 23°C | 35.0 | MPa | |
| Break, 60°C | 20.0 | MPa | |
| Break, 90°C | 5.00 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 23°C | 3.0 | % | |
| Yield, 60°C | 3.0 | % | |
| Yield, 90°C | 3.2 | % | |
| Break, 23°C | 10 | % | |
| Break, 60°C | 55 | % | |
| Break, 90°C | 95 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 4.0 | kJ/m² | |
| 23°C | 5.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 35 | kJ/m² | |
| 23°C | 65 | kJ/m² | |
| Notched Izod Impact (23°C, 3.20 mm) | 75 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 80.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 65.0 | °C | |
| Vicat Softening Temperature | 80.0 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 4.0E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | 5VA | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 960 | °C | |
| 2.00 mm | 960 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo Phenolic FM 4004F | Sumitomo Bakelite North America, Inc. | Phenolic | Sumitomo Phenolic |
| Sylvin 8250-55 Black | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Moplen EP5001 | PolyMirae | PP Copolymer | Moplen |
| Sylvin 86005-85FUV Clear Black 288 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® BKV 130 DUS008 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
