Order Products : sales@su-jiao.com

NuSil EPM-2462

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rBcghD_NuSil-EPM-2462.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs) Comments: 1.20 W/m-K, good adhesion to Aluminum

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Thermal Interface Materials (TIMs)

Comments: 1.20 W/m-K, good adhesion to Aluminum

General Information
Features	Electrically Conductive Good Adhesion Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	2.2E-4	cm/cm/°C
Thermal Conductivity	1.2	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Ionic Content
Cl	< 5	ppm
K	< 7	ppm
Na	< 5	ppm
Operating Temperature	-65 to 240	°C

Uncured Properties	Nominal Value	Unit
Color	Tan
Density	3.37	g/cm³
Curing Time (150°C)	0.50	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	80
Tensile Strength	3.45	MPa

Resin Grade	Manufacturer	Category	Trademark
Tecnoprene® FK5D NAT003	SO.F.TER. SPA	PP Homopolymer	Tecnoprene®
TITANLENE® LDF 260YZ	Lotte Chemical Titan (M) Sdn. Bhd.	LDPE	TITANLENE®
LUVOCOM® 65-9048	Lehmann & Voss & Co.	PP Copolymer	LUVOCOM®
SQUARE® LSR1929-50AH/BH	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®
NILAMID® XT4 GF50	Nilit Plastics	PPA	NILAMID®