Order Products : sales@su-jiao.com
ETILINAS BPD 3220
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | r5cqch_ETILINAS-BPD-3220.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ETILINAS BPD 3220 is a LLDPE which is designed for use in silane crosslinking process. It has been developed for LV insulation. It meets the applicable requirements as below when processed using sound extrusion practice and tesing procedure: IEC 6052-1/2; ASTM D1248, Type I, Class A, Cat. 3; ISO 1872/1-PE, KGN, 18-D022. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.4 | g/10 min | ISO 1133 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (50 Hz) | 2.20 | ASTM D150 | |
| Dissipation Factor (50 Hz) | 3.0E-3 | ASTM D150 |
| Additional Information |
|---|
| Tensile Stress at Break, IEC 811-1-1: 22 MPaElongation at Break, IEC 811-1-1: >800% |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 200 | °C | |
| Adapter Temperature | 210 | °C | |
| Melt Temperature | 225 - 235 | °C | |
| Die Temperature | 270 | °C |
| Extrusion instructions |
|---|
| Head Temperature Profile: 210-220-230°CScrew Cooling: 80°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® 1002H | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| Vyncolit® E 264H | Vyncolit N.V. | Epoxy | Vyncolit® |
| Zytel® FE3734 NC010 | DuPont Performance Polymers | Nylon 612 | Zytel® |
| COSMOPLENE® AW564 | TPC, The Polyolefin Company (Singapore) Pte Ltd | PP Copolymer | COSMOPLENE® |
| EPIMAX® ABS-808E | Osterman & Company | ABS | EPIMAX® |
