Order Products : sales@su-jiao.com
Estane® ALR CL57D-V TPU
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | r57MXs_Estane-ALR-CL57D-V-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane ALR CL57D-V is a 57 Shore D thermoplastic polyurethane (TPU) resin. Features: Contains a UV package that enhances outdoor weatherability. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (175°C/2.16 kg) | 3.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 63.4 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 15.1 | MPa | ASTM D412 |
| 200% strain | 26.0 | MPa | ASTM D412 |
| Tensile Strength (Break) | 64.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 370 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 57.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 175 | °C | |
| Middle Temperature | 180 | °C | |
| Nozzle Temperature | 185 | °C | |
| Processing (Melt) Temp | 185 | °C |
| Injection instructions |
|---|
| Fill/Pack/Cool (2 mm part): 2 sec/15 sec/10 sec |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 48.9 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 175 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 185 | °C | |
| Melt Temperature | 185 | °C | |
| Die Temperature | 185 | °C |
| Extrusion instructions |
|---|
| Screen Pack Recommendation: 20/40/80/20 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF9WKF (Series: DW) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Latiohm 57D-05 PD01 G/15 | LATI S.p.A. | Nylon, Unspecified | Latiohm |
| ORTHTEK® WF | Greene, Tweed & Co. | PEEK | ORTHTEK® |
| Plasmer 1035BM/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| Durez® 34278 | SBHPP | Phenolic | Durez® |
