Order Products : sales@su-jiao.com
Dynalloy™ OBC8200-BT50
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Dynalloy™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | r1uxQf_Dynalloy-OBC8200-BT50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DYNALLOY™OBC8200-BT50 is a translucent material used for blow molding. New Products. Commercial norms have not yet been established.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 4.72 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 930 | % | ASTM D412 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity | ASTM D3835 | ||
| 200°C, 1340 sec^-1 | 148 | Pa·s | ASTM D3835 |
| 200°C, 11200 sec^-1 | 27.0 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 166 - 188 | °C | |
| Middle Temperature | 171 - 188 | °C | |
| Front Temperature | 171 - 199 | °C | |
| Nozzle Temperature | 166 - 188 | °C | |
| Processing (Melt) Temp | 171 - 193 | °C | |
| Mold Temperature | 160 - 188 | °C | |
| Screw Speed | 50 - 100 | rpm |
| Injection instructions |
|---|
| 在使用此产品之前或之后，均须用熔体流动速率较低 (0.5 - 2.5 MFR) 的聚苯乙烯 (PS) 或聚丙烯 (PP) 彻底进行置换。DYNALLOY™ OBC8200-BT50 可利用高达 20% 的回收料同时其性能所受影响却极小，但该回收料必须是未受到污染的。为了最大限度地减小模塑期间其性能所受的影响，熔体温度应维持得尽可能低。回收料的有效性应由用户最终确定。DYNALLOY™ OBC8200-BT50 具有良好的熔体稳定性。最长停留时间可能会根据机筒尺寸有所变化。通常，如果机器闲置 8 - 10 分钟或以上，则应将机筒排空。不需要干燥 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoprene® V60K6 NERO900 | SO.F.TER. SPA | PP Homopolymer | Tecnoprene® |
| SIBUR Synthetic Rubber SKN 3345 E | SIBUR, LLC | NBR | SIBUR Synthetic Rubber |
| Xuchuan XCW-8100 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Arak HDPE EX2 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| Karina BLUE PVC COMPOUND 804-06/115-CRM | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
