Order Products : sales@su-jiao.com

CYCOM® 5250-4 RTM

Category:	MAH-g , Maleic Anhydride Grafted Polymer
Manufacturer:	Cytec Industries Inc.
Trademark:	CYCOM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qxBqLg_CYCOM-5250-4-RTM.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CYCOM® 5250-4 RTM is a true one-part homogeneous BMI resin developed specifically for the resin transfer molding (RTM) process. IT reaches very low viscosity during transfer and maintains a low viscosity for several hours, thus providing the maximum capability to fabricate complex parts. Laminates fabricated from CYCOM 5250-4 RTM are capable of service temperatures up to 400°F (204°C), but its toughness and processability make it an ideal material for 180°F (82°C) temperature applications where epoxies are commonly used. CYCOM 5250-4 RTM offers the highest open hole compression (OHC) value of any organic matrix resin while providing the highest level of toughness available in an RTM capable matrix resin.

Message

CYCOM® 5250-4 RTM is a true one-part homogeneous BMI resin developed specifically for the resin transfer molding (RTM) process. IT reaches very low viscosity during transfer and maintains a low viscosity for several hours, thus providing the maximum capability to fabricate complex parts. Laminates fabricated from CYCOM 5250-4 RTM are capable of service temperatures up to 400°F (204°C), but its toughness and processability make it an ideal material for 180°F (82°C) temperature applications where epoxies are commonly used.

CYCOM 5250-4 RTM offers the highest open hole compression (OHC) value of any organic matrix resin while providing the highest level of toughness available in an RTM capable matrix resin.

General Information
Features	Good Processability Good Toughness Low Viscosity
Uses	Aerospace Applications Reinforced Panels Structural Parts
Processing Method	Resin Transfer Molding

Physical	Nominal Value	Unit
Specific Gravity ¹	1.25	g/cm³

Mechanical	Nominal Value	Unit
Tensile Modulus	462	MPa
Tensile Strength	103	MPa
Flexural Strength	163	MPa

Thermal	Nominal Value	Unit
CLTE - Flow	7.9E-5	cm/cm/°C

Note Message
1 .	Neat Resin

Resin Grade	Manufacturer	Category	Trademark
polyvic® E-1838-IL	Unipack Plasindo	PVC, Unspecified	polyvic®
Ranger PBT PBT-201-G15 211	Beijing Ranger Chemical Co., Ltd.	PBT	Ranger PBT
Geon™ Vinyl Rigid Extrusion 87564	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Keyflex® BT 1040D	LG Chem Ltd.	TPC-ET	Keyflex® BT
Sylvin 84002-70 Natural	Sylvin Technologies Incorporated	PVC+PUR	Sylvin