PALSAFE® R 05 GF 20 FR 0

Category:	PC , Polycarbonate
Manufacturer:	pal plast GmbH
Trademark:	PALSAFE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qwN5Sq_PALSAFE-R-05-GF-20-FR-0.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PALSAFE®R 05 GF 20 FR 0 is a polycarbonate (PC) product containing a 20% glass fiber reinforced material. It can be processed by injection molding and is available in Europe. Typical application areas are: electrical/electronic applications. Features include: flame retardant/rated flame Flame Retardant High stiffness high strength high viscosity

General Information
Filler / Reinforcement	Glass fiber reinforced material, 20% filler by weight
Features	Rigidity, high High strength Viscosity, High Flame retardancy
Uses	Electrical/Electronic Applications
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.35	g/cm³	ISO 1183
Water Absorption			ISO 62
Saturated, 23°C	0.28	%	ISO 62
Equilibrium, 23°C, 50% RH	0.14	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	6000	MPa	ISO 527-2/1A/1
Tensile Stress (Break, 23°C)	95.0	MPa	ISO 527-2/1A/5
Tensile Strain (Break, 23°C)	2.5	%	ISO 527-2/1A/5

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	148	°C	ISO 306/B50

Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (Solution A)	175	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.60 mm)	V-0		UL 94

Additional Information
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 5500 to 6500 MPaTensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 90 to 100 MPaTensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 2 to 3 %Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 146 to 149 °CDensity, ISO 1183: 1.34 to 1.36 g/cm³Water Absorption, ISO 62, 23°C, Saturation: 0.25 to 0.3 %Moisture Absorption, ISO 62, 23°C, 50% RH: 0.12 to 0.15 %

Additional Information

Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 5500 to 6500 MPaTensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 90 to 100 MPaTensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 2 to 3 %Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 146 to 149 °CDensity, ISO 1183: 1.34 to 1.36 g/cm³Water Absorption, ISO 62, 23°C, Saturation: 0.25 to 0.3 %Moisture Absorption, ISO 62, 23°C, 50% RH: 0.12 to 0.15 %

Resin Grade	Manufacturer	Category	Trademark
SLOVAMID® 66 GF 25 TS	Plastcom	Nylon 66	SLOVAMID® 66
Thermoset Plastics DC-441	Thermoset, Lord Chemical Products	Epoxy	Thermoset Plastics
NuSil MED-4135	NuSil Technology	Rubber	NuSil
FHR Polypropylene 21N2A	Flint Hills Resources, LP	PP Homopolymer	FHR Polypropylene
Flexoprene® 95	Puma Tecnica S.A.I.C.F.I	PE, Unspecified	Flexoprene®