Order Products : sales@su-jiao.com
Plaskolite PETG Sheet
| Category: | PETG , Polyethylene Terephthalate Glycol Comonomer |
| Manufacturer: | Plaskolite, Inc. |
| Trademark: | Plaskolite PETG |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | quMo3I_Plaskolite-PETG-Sheet.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Plaskolite PETG Sheet is a Polyethylene Terephthalate Glycol Comonomer (PETG) material. It is available in North America. Primary attribute of Plaskolite PETG Sheet: Flame Rated. Typical application of Plaskolite PETG Sheet: Sheet |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Water Absorption (Saturation) | 0.40 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2010 | MPa | ASTM D638 |
| Tensile Strength (Break) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 180 | % | ASTM D638 |
| Flexural Strength (Yield) | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | 37 | J/m | |
| 23°C | 91 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 70.0 | °C | |
| 1.8 MPa, Unannealed | 62.8 | °C | |
| Continuous Use Temperature | 65.0 | °C | ASTM D794 |
| Glass Transition Temperature | 81.1 | °C | ASTM E1356 |
| CLTE - Flow | 9.2E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat | 1460 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 0.21 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 6.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 3.40 | ||
| 1 MHz | 3.20 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.010 | ||
| 1 MHz | 0.020 | ||
| Arc Resistance (3.00 mm) | 125 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-2 | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index | 1.567 | ASTM D542 | |
| Transmittance | 90.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-6322MPM70 | SHIN-A T&C | Epoxy | SHIN-A |
| Tritan™ TXF1021 | Eastman Chemical Company | Copolyester | Tritan™ |
| ARBOBLEND® V3 | TECNARO GmbH | Biodeg Polymers | ARBOBLEND® |
| Hostalen 4731 B | LyondellBasell Industries | HDPE | Hostalen |
| PHOENIX™ 4251 | Phon Tech Industrial Company | SEBS | PHOENIX™ |
