Order Products : sales@su-jiao.com
Dryflex® A1 602502
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qtfCcb_DryflexA1602502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex A1 602502: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 54 Shore A (4mm) Service Temperature Range: -50 -- +125 °C (unstressed material) Colour: Black, but the base material can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable The material is modified to give good adhesion to PA |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 1.80 | MPa | ASTM D638 |
| 300% secant | 3.70 | MPa | ASTM D638 |
| Tensile Strength | 4.10 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 420 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 26.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature - Unstressed Material | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 210 - 250 | °C | |
| Middle Temperature | 210 - 250 | °C | |
| Front Temperature | 210 - 250 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 210 - 250 | °C | |
| Cylinder Zone 2 Temp. | 210 - 250 | °C | |
| Cylinder Zone 3 Temp. | 210 - 250 | °C | |
| Cylinder Zone 4 Temp. | 210 - 250 | °C | |
| Cylinder Zone 5 Temp. | 210 - 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vydyne® R413 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| NOVADURAN® 5010GN6-15T | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
| Carbotex K-40MRA | Kotec Corporation | PC | Carbotex |
| Huafon JF-W-D6055A | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| LNP™ LUBRILOY™ Lexan_WR6300 compound | SABIC Innovative Plastics | AES+PC+SAN | LNP™ LUBRILOY™ |
