Order Products : sales@su-jiao.com
Jamplast Inj-07 ABS
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Jamplast, Inc. |
| Trademark: | Jamplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qs0IWl_Jamplast-Inj-07-ABS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jamplast Inj-07 ABS is a general purpose injections molding grade of ABS (Acrylonitrile Butadiene Styrene). It is a high impact, medium glass ABS, available only in natural or precolored. Typeical applications include housings, toys, small appliances, and consumer goods. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 1.8 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 66.7 | MPa | |
| Break | 44.0 | MPa | |
| Tensile Elongation (Break) | 83 | % | ASTM D638 |
| Flexural Modulus | 2170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 191 to 229 | °C | |
| Mold Temperature | 38.0 to 79.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxiglas® MG515 | Maxiglas Corporation | Acrylic (PMMA) | Maxiglas® |
| PROTEQ™ H24ST8 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| Novomer NB-10 | Novomer, Inc. | PC | Novomer |
| EVERLON® TSO-65 | Ever Polymer Co., Ltd. | SEBS+EPDM | EVERLON® |
| LEXAN™ SLD3000 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
