Order Products : sales@su-jiao.com
Gallonprene® GP640-8001
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qrNfvl_Gallonprene-GP640-8001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP640-8001 is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Typical application areas are: engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/10.0 kg) | 48 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 6.80 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 160 - 180 | °C | |
| Middle Temperature | 170 - 190 | °C | |
| Front Temperature | 180 - 200 | °C | |
| Processing (Melt) Temp | 140 - 160 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Processing Temperature Limit: 240°CInjection Pressure: HighBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 170 to 190°CCenter Temperature: 180 to 200°CFront Temperature: 190 to 210°CMelt Temperature: 140 to 160°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 240°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50%Drying Temperature: 80°CDrying Time: 2 hr |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO P20 TL | Arkema | Nylon 11 | Rilsan® |
| Sasol Polymers PE LT033 (Extrusion/Blow molding) | Sasol Polymers | LDPE | Sasol Polymers PE |
| TAISOX 7240M | Formosa Plastics Corporation | EVA | TAISOX |
| BULKSAM® NTV25 | UMG ABS, Ltd. | ABS | BULKSAM® |
| HiFill FR® PA6/6 GF15 FR BK | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
