Order Products : sales@su-jiao.com
TECOLITE KM-220(J)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qpQtl7_TECOLITE-KM-220-J-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Environmental friendly and Good moldability. Suitable compounds for the parts in the state of sealing. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" are environmental friendly compound. It has good moldability and it less generate to molding die such as tarnish. It not generate ammonia gas. Therefore,it is indispensable compound to relay, fuse holder, socket, and micro-switch used especially in the state of sealing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | |
| Molding Shrinkage 1 | |||
| Flow | 0.70 to 0.90 | % | |
| Across Flow | 1.1 to 1.3 | % | |
| Water Absorption (Equilibrium) | < 0.50 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 78.0 to 98.0 | MPa | |
| Compressive Strength | 196 to 225 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 2.5 to 3.4 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 190 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+8 to 1.0E+9 | ohms | |
| As Molded | 1.0E+10 to 1.0E+11 | ohms | |
| Dielectric Strength | > 10 | kV/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.790 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEMICOSIL® 936 UV | Wacker Chemie AG | Silicone | SEMICOSIL® |
| 4MID® 9AB22120 HUV | 4Plas | Nylon 66/6 | 4MID® |
| ACRYLITE® LED 8N LD12 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| Andur 80-5AP/Curene® 280 | Anderson Development Company | PUR-Ether/TDI | Andur |
| EMAC® SP2220 | Westlake Chemical Corporation | EMA | EMAC® |
