Order Products : sales@su-jiao.com
NEMCON H PO DP117/X2
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | NEMCON H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qp31gK_NEMCON-H-PO-DP117-X2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PO DP117/X2 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 450 | MPa | ASTM D638 |
| Tensile Strength 2(Break, 23°C) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 23°C) | 5.2 | % | ASTM D638 |
| Flexural Modulus 4(23°C, 50.0 mm Span) | 370 | MPa | ASTM D790 |
| Flexural Strength 5(Break, 23°C, 50.0 mm Span) | 20.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 40.0 | °C | ASTM D648 |
| Thermal Conductivity | 1.3 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 5.0E+12 | ohms | ASTM D257 |
| Additional Information |
|---|
| The value listed as Thermal Conductivity, ASTM C177 was tested in accordance with ASTM E1461. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2207 | Covestro - Polycarbonates | PC | Makrolon® |
| Alcryn® 2360 NC | Advanced Polymer Alloys | MPR | Alcryn® |
| Elastocon® 2825 | Elastocon TPE Technologies | TPE | Elastocon® |
| INEOS PP 151-GA02 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| LUVOCOM® 1850/PL/15/BK | Lehmann & Voss & Co. | PBT | LUVOCOM® |
