Order Products : sales@su-jiao.com
Precision Polymer E70A
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qlOuB0_Precision-Polymer-E70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Blue, Ethylene Propylene Terpolymer (EPT), 65-75 IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA), in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. ASTM & ISO designation = EPDM. Formulated for repeated use with aqueous foodstuffs intended for human consumption. Not suitable for use with fatty foodstuffs |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 70 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 6.00 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 150 | % | ASTM D412, ISO 37 |
| Compression Set | |||
| 70°C, 22 hr | 25 | % | ASTM D395B |
| 70°C, 22 hr 1 | 25 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 70 hr) | -25 | % | ASTM D412, ISO 37 |
| Change in Ultimate Elongation in Air (100°C, 70 hr) | -25 | % | ASTM D412, ISO 37 |
| Change in IRHD Hardness in Air (100°C, 70 hr) | 10 | ASTM D573, ISO 188 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 150 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Resistance - Non-brittle for 3 minutes | |||
| -- | -40 | °C | ISO R812 |
| -- | -40 | °C | ASTM D2137 |
| Minimum Operating Temperature: -40°C (-40°F) |
| Note Message | |
|---|---|
| 1 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 40 T LE K2274 | A. Schulman Europe | PP Homopolymer | POLYFORT® |
| Ryton® QC210P | Solvay Specialty Polymers | PPS | Ryton® |
| Moplen HP640J | LyondellBasell Industries | PP Homopolymer | Moplen |
| DJSilicone NE-G150 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Hypro® PP-CP 10/2 | Entec Polymers | PP Impact Copolymer | Hypro® |
