Order Products : sales@su-jiao.com
Dryflex® 47722
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qkHDy3_Dryflex-47722.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 47722: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 61 Shore A Service Temperature Range: -50 to +120 °C (unstressed material) Colour: Translucent, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 61 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.40 | MPa | ISO 37 |
| Tensile Stress (Yield) | 4.80 | MPa | ISO 37 |
| Tensile Elongation (Break) | 480 | % | ISO 37 |
| Tear Strength 2 | 20 | kN/m | ISO 34-1 |
| Compression Set 3(23°C, 24 hr) | 26 | % | ISO 815 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 120 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 210 | °C | |
| Middle Temperature | 180 to 210 | °C | |
| Front Temperature | 180 to 210 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 210 | °C | |
| Cylinder Zone 3 Temp. | 150 to 210 | °C | |
| Cylinder Zone 5 Temp. | 150 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | depending on e.g. shape of the detail and placement of gate |
| 2 . | Method C, Crescent |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1581-72D | RTP Company | TPEE | RTP |
| SLOVALEN® PC 59 GB 10 | Plastcom | PP, Unspecified | SLOVALEN® |
| TAROPRENE® 1 A25 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| XYLEX™ X7519HP resin | SABIC Innovative Plastics Europe | PC+Polyester | XYLEX™ |
| LNP™ THERMOCOMP™ OF006 compound | SABIC Innovative Plastics | PPS, Linear | LNP™ THERMOCOMP™ |
