Order Products : sales@su-jiao.com
Elastocon® 2880L
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qiGssn_Elastocon-2880L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.880 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.9 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.45 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 8.25 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 530 | % | ASTM D412 |
| Compression Set (70°C, 22 hr) | 18 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 191 - 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mytex® 1391 | Mytex Polymers | TPO | Mytex® |
| ACRYMID® TT50 | Evonik Cyro LLC | Acrylic (PMMI) | ACRYMID® |
| Geon™ Vinyl Rigid Extrusion 84110 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| CYCOLAC™ MG38 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
| CERTENE™ PHM-35AN | Muehlstein | PP Homopolymer | CERTENE™ |
