Order Products : sales@su-jiao.com
CERTENE™ LLHF-117XJ
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qe7wRW_CERTENE-LLHF-117XJ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLHF-117XJ is a certified prime, Ethylene-Hexene Copolymer developed for extrusion of Super Strength blown films needing outstanding impact and Toughness. LLHF-117XJ features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLHF-117XJ major applications include high strength liners (industrial and consumer), super strong carry-on-bags and industrial packaging. LLHF-117XJ contains No slip and High antiblock. LLHF-117XJ complies with FDA regulation 21CFR 177.1520(c)3.2a, conditions of use B - H as described in Table 2 of 21 CFR 176.170(c). LLHF-117XJ also complies with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 11.4 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 11.3 | MPa | ASTM D882 |
| MD : Break, 25 µm | 39.3 | MPa | ASTM D882 |
| TD : Break, 25 µm | 29.6 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 700 | % | ASTM D882 |
| TD : Break, 25 µm | 850 | % | ASTM D882 |
| Dart Drop Impact (25 µm) | 400 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 380 | g | ASTM D1922 |
| TD : 25 µm | 700 | g | ASTM D1922 |
| Additional Information |
|---|
| Film Specimen: 1.0 mil (25 µm) film, blow-up-ratio 2.5 :1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecotek® PC44 GR10 GR003 ZG70 | Eurotec Engineering Plastics | PC | Tecotek® |
| Toughblend® PA66-1700 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| Arak HDPE I2 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| DILAMID® 6 FV BLACK 2072/2 | Dilaplast S.p.A. | Nylon 6 | DILAMID® |
| Lumiplas® LD590 | LG Chem Ltd. | MABS | Lumiplas® |
