Order Products : sales@su-jiao.com
MAJORIS GFR208
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qdxdoU_MAJORIS-GFR208.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GFR208 is a 25% chemically coupled glass fibre reinforced polypropylene compound, halogen flame retardant UL 94 V0 (RoHs conform), intended for injection moulding. The product is available in natural (GFR208) but other colours can be supplied on request. GFR208 has a high flow rate and good dimensional stability. APPLICATIONS GFR208 is intended for injection moulding for automotive applications and electrical components. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 22 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6800 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 92.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 2.6 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 6600 | MPa | ISO 178 |
| Flexural Stress 2 | 146 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 39 | kJ/m² | ISO 179 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Novalloy-S S4100 (Type V) | Daicel Polymer Ltd. | PC+ABS | Novalloy-S |
| Ferro PP TPP15AN76BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| Epic Urethane S7381 | Epic Resins | PUR, Unspecified | Epic Urethane |
| Hostaform® C 9021 AW | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Durethan® BKV 230 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
