Order Products : sales@su-jiao.com
MACOMASS TPE MM-TPE V 5040
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qdkVcR_MACOMASS-TPE-MM-TPE-V-5040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS TPE MM-TPE V 5040 is a Thermoplastic Elastomer (TPE) material. It is available in Europe for extrusion. Important attributes of MACOMASS TPE MM-TPE V 5040 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 to 0.980 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 71 to 77 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 8.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 350 | % | ISO 37 |
| Tear Strength | > 10 | kN/m | ISO 34-1 |
| Compression Set | < 40 | % | ISO 815 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Melt Temperature | 160 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAFORM® 9 A GF 10 | A. Schulman Europe | Acetal (POM) Copolymer | SCHULAFORM® |
| SAXALAC™ 310U | SAX Polymers | ABS | SAXALAC™ |
| Nivionplast® A R356G NAT | SO.F.TER. SPA | Nylon 66 | Nivionplast® A |
| ENFLEX V1090A BLK UV | ENPLAST Americas, a Ravago Group Company | TPV | ENFLEX |
| HiFill® PA6 0390 BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
