Order Products : sales@su-jiao.com
Innothane® IE-3065
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qdK128_Innothane-IE-3065.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-3065 is an 80 shore D polyurethane surface coat formulated for hand-batch processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA or TDI. This product was developed to be used where vertical lay-ups are required or for use as a strong, durable mother-mold in silicone glove molding processes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| Cured | 1.24 | g/cm³ | |
| Hardener | 1.24 | g/cm³ | |
| Base Resin | 1.28 | g/cm³ |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 4380 | MPa | ASTM D790 |
| Flexural Strength | 78.6 | MPa | ASTM D790 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 100 Mix Ratio by Weight: 97 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 30 to 60 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 2.5 | Pa·s | |
| 25°C 2 | 16 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 4.0 to 8.0 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 75 | ASTM D2240 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIMID® N6-G15HL | Polymer Technology and Services, LLC | Nylon 6 | TRIMID® |
| ADDINYL PMD 20117 | ADDIPLAST | Nylon, Unspecified | ADDINYL |
| ALCOM® PC 740/4 UV WT1201-08LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Polidan® T/A-HF | Solvay Specialty Polymers | XLPE | Polidan® |
| OTECH PVC OW1065 - Riser Insulation | OTECH Corporation | PVC, Unspecified | OTECH PVC |
