Order Products : sales@su-jiao.com
Flexirene® MR 56 A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Flexirene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qccN0B_Flexirene-MR-56-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexirene MR 56 A is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application. Parts made by Flexirene MR 56 A are characterised by optimum rigidity. Flexirene MR 56 A is highly pure and it is suitable for all applications where good organoleptic properties are required. Main Application Flexirene MR 56 A is recommended for the production of thin walled containers requiring high mechanical properties, caps, closures and houseware. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 56 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 15.0 | MPa | |
| Break, Injection Molded | 15.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 500 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 112 | °C | ISO 306/A |
| Melting Temperature | 124 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 230 | °C | |
| Middle Temperature | 170 to 230 | °C | |
| Front Temperature | 170 to 230 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prixene® EB020E20 | POLYMAT | LDPE | Prixene® |
| RheTech Polypropylene HP501-00 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Shin-Etsu Elastomer HC-101 | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Anjacom® 350-UV/GF30 | Almaak International GmbH | Nylon 66 | Anjacom® |
| FHR Polypropylene P9H8M-015 | Flint Hills Resources, LP | PP, Unspecified | FHR Polypropylene |
