Order Products : sales@su-jiao.com
Optix® CA-81 FDA
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Plaskolite, Inc. |
| Trademark: | Optix® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qalBrX_OptixCA81FDA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Optix®CA-81 FDA is a polymethyl methacrylate-acrylic material,. This product is available in North America or Europe,. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) | 2.2 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3450 | MPa | ASTM D638 |
| Tensile Strength | 66.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Strength | 111 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 19 | J/m | ASTM D256 |
| Dart Drop Impact 1(3.18 mm) | 0.226 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 97.8 | °C | ASTM D648 |
| Vicat Softening Temperature | 107 | °C | ASTM D1525 |
| CLTE - Flow (-30 to 30°C) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Geometry GB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Razalen® P121 GR30 | Razin™ Engineering Plastics | PP Impact Copolymer | Razalen® |
| Diakon® MG102D | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| Generic Silicone Rubber, LSR | Generic | Silicone Rubber, LSR | Generic |
| Grilamid® LV-30H FWA nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Sylvin 8600-55 Yellow 4166 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
