Order Products : sales@su-jiao.com
RELENE® W 43006
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qYtgCA_RELENE-W-43006.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene W 43006 is a natural polyethylene grade recommended for insulation in jelly filled telecommunications cables. This grade contains a special stabilixation system for improved thermal resistance. It is designed to provide excellent processability for high speed wire insulating extrusion process, resistance to petroleum jelly absorption, environmental stress crack resistance and desired electrical insulation properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.60 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Molding, F0) | 500 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 18.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 480 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 600 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 118 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant | 2.60 | ASTM D150 | |
| Dissipation Factor | 4.0E-5 | ASTM D150 |
| Additional Information |
|---|
| Oxidation Induction Time, ASTM D3895: >70 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 525T | Salflex Polymers Ltd. | HDPE | Salflex |
| Secomid B EM1 NERO | Poliblend S.p.a. | Nylon 6 | Secomid B |
| SCANTEC PC S60R GF30 | Polykemi AB | PC | SCANTEC |
| SMOKEGUARD™ HP 505 NATURAL | AlphaGary | Fluoropolymer | SMOKEGUARD™ HP |
| AIE PA66 60G3F | Asia International Enterprise (Hong Kong) Limited | Nylon 66 | AIE PA66 |
