Order Products : sales@su-jiao.com
TOTAL Polyethylene HDPE BM 961
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | TOTAL Refining & Chemicals |
| Trademark: | TOTAL Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qWO9KS_TOTAL-Polyethylene-HDPE-BM-961.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TOTAL Polyethylene BM 961 is a High Density Polyethylene material. It is available in Asia Pacific or North America for blow molding or extrusion. Important attributes of TOTAL Polyethylene BM 961 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.961 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 1.2 | g/10 min | |
| 190°C/21.6 kg | 33 | g/10 min | |
| Environmental Stress-Cracking Resistance (10% Igepal, Compression Molded) | 10.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1330 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C, Compression Molded) | 290 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 129 | °C | DSC |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gardner Gloss (60°) | > 25 | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 to 199 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silamid® SV15MF | Roonamid a.s. | Nylon 6 | Silamid® |
| AKROTEK® PEEK GF 30 natural (5047) | AKRO-PLASTIC GmbH | PEEK | AKROTEK® |
| EPLAMID 66 MOS2 %2 GFR 30 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| OnFlex™ S EH 70A-3S7004 | PolyOne Corporation | TPE | OnFlex™ |
| POLYfill PPC K6020 S | Polykemi AB | PP Copolymer | POLYfill |
