Order Products : sales@su-jiao.com
Ferro PP CPP30GF39BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qWDv6A_Ferro-PP-CPP30GF39BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
25% minimum post consumer recycle (P.C.R.) Meets/Exceeds Ford Engineering Specification WSS-M4D927-A1. Primary end use is for emission carbon canister housings. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.3 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.1 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 28.6 | MPa | ISO 527-2 |
| Flexural Modulus - Tangent | 2400 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 2.0 | kJ/m² | ISO 180 |
| 23°C | 4.6 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 121 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 69.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Tensile/Izod Change, ISO 188, 1000 hours, 120°C: +10%/-1% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 101-45W255 | ExxonMobil Chemical | TPV | Santoprene™ |
| Unichem 8712A-02-HS | Colorite Polymers | PVC, Flexible | Unichem |
| Andur 950 AP | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| Dryflex® A2 660701 | ELASTO | SEBS | Dryflex® |
| Sylvin 5175-92 Red 6243 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
