Order Products : sales@su-jiao.com

Eltex® B4020LGN1963

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qVeTP9_Eltex-B4020LGN1963.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
High Density Polyethylene – Milk blow moulding resins Benefits & Features Eltex® B4020LGN1963 high density polyethylene is a copolymer manufactured by INEOS O&P Europe using its supported catalyst process. It is a granular resin used for high-speed blow moulding of bottles. Its high purity makes it suitable for the packaging of both pasteurized and sterilized milk (in bottle sterilization). The resins guarantee the preservation of the organoleptic properties of milk and have the following essential properties: A very low odour level Good heat resistance Good impact resistance Good stress cracking resistance

Message

High Density Polyethylene – Milk blow moulding resins

Benefits & Features
Eltex® B4020LGN1963 high density polyethylene is a copolymer manufactured by INEOS O&P Europe using its supported catalyst process. It is a granular resin used for high-speed blow moulding of bottles. Its high purity makes it suitable for the packaging of both pasteurized and sterilized milk (in bottle sterilization).

The resins guarantee the preservation of the organoleptic properties of milk and have the following essential properties:

A very low odour level

Good heat resistance

Good impact resistance

Good stress cracking resistance

General Information
Features	Copolymer Food Contact Acceptable Good Impact Resistance High Density High ESCR (Stress Crack Resist.) High Purity Low to No Odor Med.-Wide Molecular Weight Distrib. Medium Heat Resistance
Uses	Bottles
Agency Ratings	EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating
RoHS Compliance	Contact Manufacturer
Forms	Granules
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.952	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.8	g/10 min	ISO 1133

Resin Grade	Manufacturer	Category	Trademark
TEREZ PA 6 7600 FL HF/2	TER HELL PLASTIC GMBH	Nylon 6	TEREZ PA 6
NYLOY® MG-0033N-V0 HG35N4	Nytex Composites Co., Ltd.	Nylon, Unspecified	NYLOY®
Glastherm® HT	Glastic Corporation	Polyester, TS	Glastherm®
KEP® 510	Kumho Polychem Co., Ltd.	EPDM	KEP®
Bergamid™ A70 GK25 H natural TM-Z	PolyOne Corporation	Nylon 66	Bergamid™