Order Products : sales@su-jiao.com
Auracell® CAP MH
| Category: | CAP , Cellulose Acetate Propionate |
| Manufacturer: | Rotuba Extruders, Inc. |
| Trademark: | Auracell® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qPUGol_AuracellCAPMH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Scented grade |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 66 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 149 - 154 | °C | |
| Middle Temperature | 163 - 168 | °C | |
| Front Temperature | 179 - 191 | °C | |
| Nozzle Temperature | 179 - 191 | °C | |
| Mold Temperature | 38 - 82 | °C | |
| Injection Pressure | 7.58 - 9.65 | MPa | |
| Back Pressure | 0.00 - 0.345 | MPa | |
| Vent Depth | 0.051 - 0.076 | mm |
| Injection instructions |
|---|
| Root: 280 to 290°FRear - Root: 290 to 300°FInjection Cycle Times: 8 to 12 secsBooster Cycle Time: 6 to 12 secCure Time: 40 to 70 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1207-70A | RTP Company | TPU-Polyester | RTP |
| MAXAMID™ PA66G33HSL-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| TECAST™ 6PAL | Ensinger Inc. | Nylon 6 | TECAST™ |
| CYCOLAC™ DL200H resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
| PENTAMID A GV50 H Schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
