Order Products : sales@su-jiao.com
Alpha PVC 3016GBF-70S CLEAR 000X
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qOPlku_Alpha-PVC-3016GBF-70S-CLEAR-000X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3016GBF-70S Clear 000X is a DEHP-free, bovine-free, Gamma radiation resistant, flexible PVC compound produced from FDA sanctioned ingredients. Developed for injection molding, 3016GBF-70S Clear 000X has excellent heat stability and physical properties, and also very good low temperature flexibility and water-blush resistance. This compound has been designed to pass the USP Class VI and cytotoxicity requirements for biomedical devices. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 to 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (175°C/20.0 kg) | 10 | g/10 min | ASTM D3364 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 6.35 mm) | 67 to 73 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (1.91 mm) | 6.21 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 350 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 45.5 | kN/m | ASTM D1004 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 157 to 168 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP CX03-81 | Saudi Basic Industries Corporation (SABIC) | PP Copolymer | SABIC® PP |
| Quadraflex™ ALE-55D-B20 | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| SLOVAMID® 66 GF 30 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Unipren® Elastomers A3 PRTA010 80A EM06S1 UP336 | Petropol Industry and Trade of Polymers LTDA | SEBS | Unipren® Elastomers |
| Kaneka MUH K-7 | Kaneka Corporation | ABS | Kaneka MUH |
