Order Products : sales@su-jiao.com
NEXUS BIO BIO-100
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | Nexus Resin Group, LLC. |
| Trademark: | NEXUS BIO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qNygS8_NEXUS-BIO-BIO-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Film Blowing Grade Starch-Based Biodegradable Resin Nexus BIO-100 is a Hybrid starch resin based on the combination of thermoplastic starch (25%-75%), degradable polyethylene (10-45%) and other self oxidation. This grade of resin is designed for manufacturing biodegradable plastic films with high mechanical strength, outstanding elongation properties and toughness and easily colored. Applications include agricultural films, garbage bags (with / without poly drawstring), merchandise bags (T-shirt bags / shopping bag), Promotional bags, Special inside / outside packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) | 0.80 - 1.5 | g/10 min | Internal method |
| Moisture Content | 0.50 | % | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biology Content | > 62 | % | Internal method |
| Hexane Extraction | % | Internal method | |
| Starch Content | > 35 | % | Internal method |
| Tear Strength - Right Angle | > 40.0 | MPa | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | Internal method | ||
| MD : Yield | 25.6 | MPa | Internal method |
| TD : Yield | 33.0 | MPa | Internal method |
| Tensile Elongation | Internal method | ||
| MD : Fracture | 380 | % | Internal method |
| TD : Fracture | 560 | % | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | > 65.0 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 175 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C |
| Extrusion instructions |
|---|
| Extruder Head (I): 185°CExtruder Head (II): 175°CRotational Speed: 600 to 70 r/minBlow-up Ratio: 4 to 5Pulling Speed: 80 to 150 r/minScrew L/D Ratio: 24:1 to 32:1Precision Temperature Control: ± 5°CFiller installment: 120 mesh-120 mesh (two levels) from inside to outside |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® CP 0714 | Plastic Solutions, Inc. | PP Copolymer | PrimaFlex® |
| Silopren® LSR 4020 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| NAXELL™ PC429HHI | MRC Polymers, Inc. | PC | NAXELL™ |
| HiFill FR® ABS GF10 FR | Techmer Engineered Solutions | ABS | HiFill FR® |
| Interpol 47-5134/47-5205 | Cook Composites and Polymers | Polyester, TS | Interpol |
