Order Products : sales@su-jiao.com
Vipel® K095-AAA-00
| Category: | Vinyl Ester , Vinyl Ester |
| Manufacturer: | AOC, L.L.C. |
| Trademark: | Vipel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qKE8QV_Vipel-K095-AAA-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vipel Fire Retardant Epoxy Novolac, Vinyl Ester Resin The Vipel K095-AAA-00 is a fire retardant epoxy novolac vinyl ester resin dissolved in styrene. Vipel K095-AAA-00 is ideally suited for use in hand lay-up, spray-up, and filament winding processes where outstanding mechanical properties and resistance to solvents, oxidizing environments, chemicals and good thermal mechanical properties is required. Corrosion The epoxy novolac-based backbone chemistry provides resistance to organic solvents and good resistance to acids and alkalies. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Fire Retardancy Vipel K095-AAA-00 meets ASTM E 84 class I requirements for flame spread and smoke development neat. Heat Temperature Resistance Vipel K095-AAA-00 has excellent thermal mechanical properties. Processability Vipel K095-AAA-00 is suitable for filament winding and hand lay up processes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | |
| Styrene Content | 35 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Spread Index | 25.0 | ASTM E84 | |
| Smoke Developed | 300 | ASTM E84 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Exotherm | |||
| Gel to Peak | 9.0 | min | |
| Peak | 202 | °C | |
| Gel Time (25°C) 1 | 25.0 | min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 42 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3720 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 92.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.6 | % | ASTM D638 |
| Flexural Modulus | 3930 | MPa | ASTM D790 |
| Flexural Strength | 159 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 143 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity 2(25°C) | 250 | cP |
| Note Message | |
|---|---|
| 1 . | Gel time with 0.2% Cobalt 6%, 0.025% DMA and 1.25% MEKP |
| 2 . | Brookfield RV viscosity spindle 2 at 20 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Westlake Dielux® | Westlake Plastics Company | Acetal (POM) Copolymer | Westlake |
| HAIPLEN EP10 G4 BA | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| OmniCarb™ PC/ABS GR10 | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
| Sylvin 8200-60 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sumiliteresin® PR-T-10 IP | SBHPP | Phenolic | Sumiliteresin® |
