Order Products : sales@su-jiao.com
ALCUDIA® HDPE 3802-N
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qK9oKZ_ALCUDIA-HDPE-3802-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® 3802-N black compound, is an hexene copolymer of high molecular weight especially apt for the extrusion of pipe for gas and potable water, to comply with the requirements of the EN 1555 and EN 12201 European specification standards as a PE80. The combination of the antioxidant system and minimum of 2.0% well dispersed carbon black used in 3802-N provides the following features:
Based on the new ISO classification the ALCUDIA® 3802-N compound is classified PE 80. Because other good mechanical properties and their characteristics, the polyethylene black compound ALCUDIA® 3802-N, is designed to produce pipe for potable water, to comply with the international requirements. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.949 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.18 | g/10 min | |
| 190°C/21.6 kg | 18 | g/10 min | |
| 190°C/5.0 kg | 0.80 | g/10 min | |
| Environmental Stress-Cracking Resistance (10% Antarox CO-630, F50) | > 4000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 30.0 | MPa | EN 638 |
| Tensile Strain (Break) | 1100 | % | EN 638 |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Internal Pressure Resistance | EN 1555/12201 | ||
| 10 MPa : 20°C | > 4.2 | day | |
| 4.0 MPa : 80°C | > 41.7 | day | |
| 4.6 MPa : 80°C | > 6.9 | day |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (210°C) | > 20 | min | EN 728 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Long-Term Hydrostatic Strength - 50 years (20°C) 1 | > 8.00 | MPa | ISO TR 9080 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 to 190 | °C | |
| Cylinder Zone 2 Temp. | 175 to 195 | °C | |
| Cylinder Zone 3 Temp. | 180 to 200 | °C | |
| Cylinder Zone 4 Temp. | 185 to 205 | °C | |
| Cylinder Zone 5 Temp. | 190 to 210 | °C | |
| Melt Temperature | 190 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Regression Curve |
| 2 . | Rate A (50°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo Phenolic FM 4017F | Sumitomo Bakelite North America, Inc. | Phenolic | Sumitomo Phenolic |
| Sup-tech B101EX | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 6 | Sup-tech |
| Andur 7003 AP-F | Anderson Development Company | PUR-Ether/TDI | Andur |
| K-Prene 7000 XL 55 | Technovinyl Polymers India Ltd. | TPV | K-Prene |
| KumhoSunny PC HCG2530MP | Shanghai KumhoSunny Plastics Co., Ltd. | PC | KumhoSunny PC |
